Т³гж 12 – Perfect Aire PATW12002 User Manual
Page 12
11
This units increased performance characteristics means that;
1. The rear air intake moved to the opposite side,
2. The depth had to be increased.
It is very important that these installation instructions are followed so your unit can operate at
maximum efficiency.
If this is an existing sleeve, and there is an existing rear grill, the louvers will have to be bent
as per the instructions at the beginning of each section.
If this proves too difficult to accomplish;
EITHER
1. Remove the existing grill.
2. Place the included aluminum grill towards the rear of the unit.
3. Mark through the hole positions.
4. Drill through the sleeves flanges with a 1/8 drill bit.
5. Attach the new grill with self-threading screws and washers(not included).
6. It is VERY IMPORTANT that the grill is placed exactly as shown below.