Т³гж 9, Air conditioner features(continued), Displays displays – Perfect Aire PATW12002 User Manual

Page 9

Advertising
background image

8

TIMER: AUTO START/

STOP FEATURE:

Press Timer
button

DO THIS:

AIR CONDITIONER FEATURES(CONTINUED)

CHECK FILTER FEATURE:

Press Check
Filter button

DO THIS:

Energy

Saver

on

off

Timer

Auto

Fan

Cool

Dry

Mode

TEMP/TIMER

TEMP/TIMER

Sleep

Check

Filter

Follow

Me

Auto

On/off

Fan

High

Med

Low

on

off

Timer

TEMP/TIMER

TEMP/TIMER

Clean

Air

This feature is a reminder to clean the Air Filter for
more efficient operation. The LED(light) will illumi-
nate after 250 hours of operation. To reset after
cleaning the filter, press the Check Filter button and
the light will go off.

NOTE:

NOTE:

- When the unit is on or off, first press the Timer button,
the TIMER ON indicator light illuminates. It indicates
the Auto Start program is initiated.
- When the time of TIMER ON is displayed

- Press or hold the UP or DOWN button to change the
Auto time by 0.5 hour increments, up to 10 hours,then
at 1 hour increments up to 24 hours. The control will
count down the time remaining until start.
- The selected time will register for 5 seconds, and the
system will automatically revert back to display the
previous temperature setting or room temperature when
the unit is on.(When the unit is off,there is no display.)
- Turning the unit ON or OFF at any time or adjusting
the timer setting to 0.0 will cancel the Auto Start/Stop
timed program.

,press the

Timer button again, the TIMER OFF indicator light
illuminates. It indicates the Auto Stop program is
initiated.

O

O

Shows the set temperature in C or F and the
Auto-timer settings. While on Fan only mode, it shows
the room temperature.

DISPLAYS:

-Evaporator temperature sensor error-Unplug the
unit and plug it back in. If error repeats, call for
service.
NOTE: is displayed as shown in the left picture.
HS -Electric heating sensor error-Unplug the unit and
plug it back in. If error repeats, call for service.

Error codes:
AS-
Room temperature sensor error-Unplug the unit
and plug it back in. If error repeats, call for service.
NOTE: In Fan only mode, it will display LO or HI .

Energy

Saver

on

off

Timer

Auto

Fan

Cool

Dry

Mode

TEMP/TIMER

TEMP/TIMER

Displays

DISPLAYS:

Advertising