Perfect Aire PATW12002 - Manual (Page 26)

Solution Problem
Water dripping
OUTSIDE when
unit is cooling.
Unit removing large quantity of moisture from humid room. This is normal during
excessively humid days.
Remote Sensing
Deactivating
Prematurely
(some models)
Remote control not located within range. Place remote control within 20 feet & 180
radius of the front of the unit.
Remote control signal obstructed. Remove obstruction.
Room too cold
Set temperature too low. Increase set temperature.
25
The design and specifications are subject to change without prior notice for product
improvement. Consult with the sales agency or manufacturer for details.
NOTE: A highly recommended troubleshoot for any issue in general
consists of turning off unit and unplugging for 5 minutes.
It is also recommended to try another outlet.