phil&teds e3 buggy - Manual (Page 13)

ones ` twos
double buggy
(carry 2 toddlers)
1.
Start with toddler position.
2.
Ensure hinges are removed from
double seat.
3.
Align tubes with supports on back of
buggy frame.
4.
Push in silver buttons and slide on
ensuring buttons pop through holes
on frame. 5.
Double seat will sit on main frame of buggy.
To attach retaining strap on double seat:
1.
Undo snaps at top of sunhood.
2.
Push sunhood forward.
3.
Attach retaining strap at back of double
seat around main buggy frame using clip.
4.
Reattach sunhood snaps.
Buggy can be folded in this position.
WARNING: Never use baby & toddler buggy without
the retaining strap.
Load heavier toddler in front seat first.
Then place lighter toddler in double seat
at back. Always unload rear toddler first.
™
11 10
Never use
double seat
without a
toddler in
front seat.