phil&teds e3 buggy - Manual (Page 16)

blazing saddles
1. Unpack and use
hook/loop tape on
back to attach to side
of buggy frame.
2.
Repeat for other side.
hangbag & belt
1.
Attach round buggy
handle using buckle
and tighten straps.
2.
Can also be used
around waist - adjust
for comfort on hips.
e3 travel bag
1.
Remove buggy
wheels (and rear
guards) to fit buggy
into bag.
tricks ` treats
buggy storage
bacpac X
Put it on your back or attach it to your buggy.
1.
Remove 2 straps looped through D rings,
‘a’ and ‘b’ , at top of bacpac.
2.
Attach clips on straps to bacpac D rings,
‘a’ and ‘b’ , and attach straps around
buggy handle using snaps.
3.
Use hook/loop tape on bottom of 2
shoulder straps to attach bacpac to either
side of buggy frame.
4.
Bottle/snack holder clips into holder
on buggy side (right hand side when
standing at back of buggy).
15 14
a
b
Can fit buggy and
double kit.