phil&teds e3 buggy - Manual (Page 7)

`
`
a
b
three: up ` running
1.
Turn buggy over onto 3 wheels.
2.
Pull up rear frame.
(Note: For double buggy do not lift frame using double
seat as you may damage hinges.)
3.
Pull up until you hear a resounding ‘click’.
Ensure that locks are engaged. Seat
should now be firmly in place.
Make sure children are clear of buggy before
folding, unfolding or adjusting the buggy. Watch
fingers - injury may result.
5 4
to fold
1.
Press levers ‘a’ and ‘b’ (autolocks) on
either side at bottom of frame seat with
fingers whilst holding frame with palms
of hands. (UK - press lever
‘b’ and pull
lever ‘a’ ).
2.
Let handle drop down, lift buggy by
cross bar (parallel to bumper bar) ‘c’ ;
front wheel (swivel) folds under frame.
3. Attach webbing under footwell
around frame and attach wrist strap
(once handle on) around front wheel
to help hold buggy folded (use
snap fasteners).
4.
Ensure levers ‘a’ and ‘b’ (autolocks) are
properly engaged (as above).
Ensure that you hold the main
frame of the buggy when lifting in
and out of car (as shown).
c