phil&teds T2 travel cot - Manual (Page 4)

nitty gritty
a
&
1. Locate the two side poles and fit
together in the middle. The poles
should curve outwards and lie flat.
2. Fit the center joint on the leg
poles together in the same way.
3. Fit the ends of the side poles, end poles
and leg poles onto the corner fittings,
placing the slots in the poles onto the
keys of the plastic corners. Repeat for
the other 3 corners.
Note: keep the elastic cord clear when
inserting a corner piece.
'click'
'click'
'clip'
'click'
'snap' 'snap' 'snap'
&
4.
Turn the cot onto its leg poles, fix
the end of the poles into the corner
webbing sockets and do up snap.
5.
Connect the four buckles around
the top of the leg poles to the end
buckles. They should be tight.
6.
Snap fasten the end covers over
the end poles.