PRG Bad Boy User Manual 1.6 - Manual (Page 29)

BAD BOY ® SPOT LUMINAIRE USER MANUAL 21
Step 6. Feed safety cables through mounting bracket slots and secure around pipe.
Step 7. Connect power and data cables according to "Connecting Power and Data" on page 23.
Figure 2-7: Vertical "Yoke Out" Hanging Configuration
Remove Luminaire From Case
Attach to Vertical Truss
Vertical
Truss
Display
UP
b) Using a third person,
secure in place by
tightening Truss Hook
wing bolts.
a) Using two people, carefully lift
luminaire into mounting position so that
display is facing downward
.
Wing Bolt
1
2
Vertical
Truss