PRG Mbox Designer Manual 3.8 - Manual (Page 233)

MBOX ® MEDIA SERVER USER MANUAL 225
* Special commands require that the value be held for three
seconds, followed by an immediate change to 0 (without
any other values in between).
** When the control channel stays at this value for three sec-
onds, the Camera Fog and Blur controls are mapped to
Blend and Overlap respectively. These controls are used to
make changes to the blend for use with the Wide Pan-
oramic mode.
Pixelmapping Control Channel
Values Command
0 Enable All
254 Disable Masked
255 Disable All
Alignment Rectangles
Values Play Mode
120 All Rectangles, no circle or X
121-129
Group 1-9, no circle or X, # corresponds to
group
130 All Rectangles, with circle or X
131-139
Group 1-9, with circle or X, # corresponds to
group
Edge Blending Mode
Values Mode Curve
0 Use Remote Settings n/a
1-8 Eighth Order Steep
9 Eight Order w/ Grid Steep
10-18 Fourth Order Medium
19 Fourth Order w. Grid Medium
20-28 Second Order Shallow
29 Second Order w. Grid Shallow
Shutter Control
Chan Size Function Default Snap
1 1 Shutter Shape 0 Y
2 2 Shutter X 32767 N
4 2 Shutter Y 32767 N
6 1 Red 0 N
7 1 Green 0 N
8 1 Blue 0 N
9 2 Shutter Scale 65535 N
11 1 Shutter Edge 0 N
12 1 Shutter 1a 0 N
13 1 Shutter 1b 0 N
14 1 Shutter 2a 0 N
15 1 Shutter 2b 0 N
16 1 Shutter 3a 0 N
17 1 Shutter 3b 0 N
18 1 Shutter 4a 0 N
19 1 Shutter 4b 0 N
20 1 Shutter Rotation 127 N
Shutter Shape
Values Shape Notes
0-9 Disabled
10-19
Moving
Light Mode
Separate controls for each end of
shutter. If both controls are zero,
shutter disappears.
20-29 Leko Mode
Distance and angle controls. If
distance is zero, shutter disappears.
30-39 Iris Mode
A round iris, scale is magnified to
enclose the screen. No other controls.
40-49 Blob Mode
A Bezier curve is drawn touching the
midpoints of the rectangle formed by
Leko Mode.