Preparation of hot drinks, Cup heating device, Warning – Cecilware VAE-J1 User Manual
Page 14
espresso coffee machine - instructions for the user
14
- english
R
STOP
PROG.
6.1 DISPENSING HOT WATER MANUALLY
To dispense hot water, turn the tap knob counter-clockwise (1): the amount of water which
comes out of the hot water nozzle (2) will be proportional to the opening of the tap.
6.2 DISPENSING HOT WATER AUTOMATIC
Programming
• Place the programming lever in the ON position (4) It is located under the front right panel
of the body (in some models, to access programming you only need to press PROG/STOP
(5) for 5 seconds or to turn the programming key);
• put the cup under the hot water nozzle;
• press the PROG/STOP key (5) and all dose key LED will come on;
• press the key to dispense hot water (3);
• when the desired dose has been attained, confirm by pressing the PROG/STOP key (5);
• Repeat this operation for the other dose keys.
• upon completion of programming, place the programming lever (4) back in the OFF
position.
To dispense steam, turn the tap knob counter-clockwise (6): the amount of steam which comes
out of the steam nozzle (7) will be proportional to the opening of the tap.
WARNING
Handle the steam nozzle with care using the rubber anti-burn handle
(8)
and do
not touch the hot water nozzle. Contact with steam and hot water may be harmful
to people, property or animals.
2
1
3
4
5
6
7
8
The cup heating device is for heating cups before they are used.
• Place the cups on the upper surface (1) of the coffee machine.
• Start the electric heating element with the switch (2) or with the push button
panel.
1
2
WARNING
For safety reasons we advise against putting cloths or other objects
on the upper surface of the machine as they could obstruct normal air
circulation.
Dispensing hot water
• Put the cup under the hot water nozzle;
• press the hot water key. Wait for water to be dispensed;
• to stop delivery in advance, press the hot water delivery key again (3) or press the
STOP key.