Boat battery pack installation, Charging warnings, Impulse 9 • blackjack 9 – Pro Boat PRB08000 User Manual

Page 4

Advertising
background image

Impulse 9 • Blackjack 9

Boat Battery pack Installation

1. Turn the latch on the canopy and carefully pull

up and back from the hull. A tab on the front of

the canopy fits in a slot in the hull.

2. Adhere loop tape (included) to the battery.

Do not cover the battery warning label.

3. Connect the battery.
4. Secure the boat battery on the hook strip in the

boat.

5. Refer to the Getting Started instructions about

powering on your boat.

Charging Warnings

WARNINg: Failure to exercise caution while

using this product and comply with the following

warnings could result in product malfunction,

electrical issues, excessive heat, FIRE, and

ultimately injury and property damage.

• Read all safety precautions and literature prior to use

of this product.

• Never leave the battery and charger unattended

during use.

• Never allow children under 14 years of age to charge

battery packs.

• Never attempt to charge damaged batteries.
• Never charge a battery if the cable has been pinched

or shorted.

• Never allow the batteries or charger to come into

contact with moisture at any time.

• Never charge batteries in extremely hot or cold places

(recommended between 50–80°F (10–26°C)) or in

direct sunlight.

• Always use only Ni-MH rechargeable batteries. This

charger cannot charge batteries such as “heavy duty”,

“alkaline”, “mercury” or “lithium" batteries.

• Always connect to the charger correctly.
• Always disconnect the battery and charger after

charging and let them cool between charges.

• Always inspect the battery before charging.
• Always terminate all processes and contact Horizon

Hobby if the product malfunctions.

• Always make sure you know the specifications of

the battery to be charged or discharged to ensure

it meets the requirements of this charger.

• Always connect the charge cable to the charger

first, then connect the battery to avoid short circuit

between the charge leads. Reverse the sequence

when disconnecting.

• Always constantly monitor the temperature

of the battery pack while charging.

• Always end the charging process if the charger

or battery becomes hot to the touch or starts

to change form during the charge process.

4

EN

Advertising
This manual is related to the following products: