Pro Boat PRB2200 V.1 User Manual
Page 12
Advertising
Section 7: Maintainance (cont.)
12
4. Carefully pull the ferrule away from the
stuffing tube. You will need to pull at an angle to
clear the aluminum strut.
5. Liberally lubricate the entire length of the flex
shaft with cable grease as shown.
6. Carefully re-install the flex shaft and nylon
bushing, making certain that you correctly tighten
the collet nut. Next, re-install the drive shaft and
propeller and tighten set screws on the flats of
the drive shaft.
Advertising