Pro Boat PRB2200 V.1 - Manual (Page 6)

Section 1: Receiver and Transmitter Battery Installation (cont.)
6
 7. Re-install the battery holder back into the
radio box and properly seal the radio box with
clear tape. Failure to properly seal the radio box
could result in damage to your radio equipment.
 8. Re-attach the tuned pipe and coupler to the
exhaust manifold.
 9. Re-install the tuned pipe mount.
Transmitter Batteries
 1. Remove the transmitter from the box
 2. Remove the battery cover on the bottom of
the transmitter.
 3. Note the proper polarity and insert 8 “AA”
batteries into the transmitter.
 4. Turn on the radio to ensure the batteries have
been installed correctly.
 5. Turn the radio off.