Pro Boat PRB2200 V.1 User Manual
Page 5
Advertising
5
Section 1: Receiver and Transmitter Battery Installation
Receiver Batteries
1. Remove the two knurled aluminum nuts that
secure the cockpit as shown. Pull the cockpit off
the boat.
2. Carefully note how the exhaust system
is assembled.
3. Use a 2.5mm hex wrench to remove the
tuned pipe mount as shown.
4. Carefully remove the tuned pipe by sliding the
silicone coupler apart from the exhaust header
5. Remove the clear lid that covers the
radio box.
6. Remove the dry cell battery holder from the
radio box and unwrap the foam around the
dry cell battery holder. Install 4 “AA” alkaline
batteries into it as shown. Note the proper
polarity. Wrap the battery box in foam.
Advertising