Pro Boat PRB2400 - Manual (Page 14)

After you have finished rigging the sails, it will be
helpful to trim the sails in order to optimize the
performance of your boat. It is often necessary to
briefly sail the Sanibel in order to see how the sails
need to be trimmed.This section covers hints and
tips for trimming your Sanibel™ for the best
performance. Remember to take your time to
optimize your sailing pleasure.
❍ 1. Check to make sure the main boom and jib
boom are in line with each other. Adjust the jib
stay at the top of the jib sail to position the jib
boom.
❍ 2.With the radio system on, move the left stick
on your transmitter "up" and manually push the
main sail and jib sail open.You should be able to
open the sails to at least a 60-degree angle. If
you cannot do this, it will be necessary to adjust
the length of the line (allowing more slack) by
adjusting the jib stays located underneath the
main sail and jib sail booms.
Section 8 – Performance Tips
14