Pro Boat PRB2400 - Manual (Page 8)

❍ 1. Locate the jib sail boom. It will be marked "K"
on one end, which will face the bow of the boat.
Pass the rigging line marked "K" from the jib sail
though the hole in the boom end.
❍ 2. Position the line so the distance between the
boom and sail is between 3/4" and 1 1 / 4
". Secure
the excess line by wrapping it around the cleat
and placing the end of the line in the notches of
the cleat.
❍ 3. Repeat Step 17 for the line marked "L" on
the jib sail.
Hint:The jib boom will be parallel
to the bottom of the jib sail once
Steps 17 and 18 are complete.
❍ 4. Carefully unwrap the bow rigging cable
marked "A." Attach the rigging cable to the
fitting at the bow of the boat marked "A."
Section 2 – Rigging Installation
8