Section 1: building the boat stand – Pro Boat PRB2800 User Manual
Page 7
Advertising
1. There are 4 plywood pieces. The 2 short
plywood pieces are the ends of the boat stand.
2. Attach the 2 long plywood pieces of the
interlocking boat stand to the end of one of the
short plywood pieces. Repeat with the remaining
short plywood piece.
3. Secure the interlocking boat stand with thick
CA or epoxy.
1. Remove the knurled aluminum nut securing
the cockpit. Pull the cockpit off the boat.
Receiver Batteries
Section 1: Building the Boat Stand
Section 2: Installation of Receiver and Transmitter Batteries
Advertising