Pro Boat PRB3050 - Manual (Page 3)

3
 1. Remove the battery cover from the
transmitter.
 2. Install 8 AA alkaline batteries into the
transmitter. Be sure each battery cell is
installed in the proper polarity. The polarity
is marked at each cell’s location inside the
transmitter.
 3. Slide the battery cover in place.
 4. Move the switch to the "ON" position. The LED
will light if the batteries are in good condition
and installed properly.
LEDs
Switch ON
 5. Make sure to turn off the transmitter before
proceeding with the installation of the motor
battery in your boat.
Switch OFF
Installation of Transmitter Batteries