Checking the radio system – Pro Boat PRB3050 User Manual
Page 5
5
1. Turn on the transmitter then the receiver
and check for correct operation. Move the
right stick on the transmitter left and right.
The rudder should move relative to the stick
movement.
Steering
2. With the propeller free from any objects,
give some throttle input to ensure that the
motor is working. If everything appears to
be functioning correctly, you are ready to
run your boat! If any of these functions are
reversed, change the respective reversing
switch position.
Throttle
Note
: If you are transporting the boat,
disconnect the battery from the speed controller
and then turn the radio off until you are ready
to run the boat. Once ready, simply turn the
radio on and plug the battery into the speed
controller, making sure that the throttle stick
is in the neutral position. Read the Electronic
Speed Control instructions (included with the
boat) before operating.
Checking the Radio System