Pro Boat PRB3150 User Manual

Page 3

Advertising
background image

3

It is important that you read and follow this

instruction manual, along with the radio

system manual before you run this exciting

boat. Failure to read and understand the

manual could result in personal injury,

property damage or permanent damage to

your boat. It is also important to run your

boat responsibly. With proper care and

maintenance, you will be able to proudly

enjoy your ShockWave 26 Brushless Deep-V

for many years to come.
When operating the boat, stay clear of

people, full-scale boats, stationary objects

and wildlife. It is preferable to operate the

ShockWave 26 Brushless Deep-V in low wake,

low wind conditions and in areas free of

people, wildlife and objects.
With 2.4GHz Spektrum marine technology,

there is no need to be concerned with any

other boats operating on the same frequency

or RF interference. Check all of the hardware,

and the propeller for damage and loose

screws before and after each run.

If at any time while operating your model

you sense any abnormal function, end your

operation immediately. Do not operate your

boat again until you are certain the problem

has been corrected. Always stay clear of

the propeller.
This is a sophisticated hobby Product and

not a toy. It must be operated with caution

and common sense and requires some basic

mechanical ability. Failure to operate this

Product in a safe and responsible manner

could result in injury or damage to the

Product or other property. This Product is

not intended for use by children without

direct adult supervision. The Product manual

contains instructions for safety, operation

and maintenance. It is essential to read and

follow all the instructions and warnings in the

manual, prior to assembly, setup or use, in

order to operate correctly and avoid damage

or injury.

You will need to purchase the following to get your boat on the water:

• 4 AA alkaline batteries for the radio transmitter
• 1-7.2V Ni-MH Battery Pack with Deans Connector (PRB3313 or PRB3314) or 1-7.4V Li-Po 25C

Battery (DYN5360D)

• Prophet Plus AC/DC Charger (DYN4036) or for Li-Po batteries, the AC/DC LiPo Charger

(DYN4066)

• Tamiya/Deans adapter (PRB3312)

General Guidelines and Safety Precautions

Additional Required Items

PRB3314

4200mAh

PRB3313

3600mAh

Advertising