Pro Boat PRB3300 - Manual (Page 4)

44
• Assembled Blackjack 26 Brushless EP RTR
• Pro Boat radio transmitter
• Boat stand
Attach the side stand pieces by
interlocking them into the end pieces as
shown. Secure the interlocking pieces
with medium CA or epoxy. Make certain
you allow the adhesive to fully cure
before placing your boat on the stand.
Always stay clear of the propeller.
Carefully remove the boat and radio
transmitter from the box. Inspect the
boat to make sure no damage is present.
If you notice damage is present, please
contact the hobby shop where you
purchased it.
Contents
Section 1: Assembling the Boat Stand
Inspection