Accessory installation – Pro Boat PRB3375 User Manual
Page 10
10
The installation of the accessories is not
mandatory, but will add some incredibly scale
appeal to your model. There are a lot of
items to install, so take your time and take
frequent breaks to avoid frustration when
working with all the small parts.
Attaching an accessory to the hull simply
requires placing a small drop of medium CA
on the part, then placing it in the correct
location on the hull after removing the
locating sticker. The following will help
guide where each accessory is located in
alphabetical order. Use this section of the
manual, as well as the photos on the box, to
install the accessories.
Required Tools and Adhesives
Hobby knife or similar
Medium CA
Pin vise
Drill bit: 5/64-inch (2mm)
Required Equipment and Accessories
Hull, main tower, secondary tower
1. Accessory item A and location.
2. Accessory item B and location.
3. Accessory item C and location.
Accessory Installation