Pro Boat PRB3375 - Manual (Page 5)

5
 4. Carefully lift the rear foam support. Lift
the support straight up and out of the box.
 5. Use side cutters to trim the wire ties at
the rear of the hull. Lift the front of the
hull upward slightly, then lift the hull from
the box.
 6. Use a knife to cut the tape that secures
the packing foam for the main tower to
the box.
 7. Carefully lift the main tower and its
packaging from the box.
 8. Use side cutters to cut the three
ties that secure the main tower to the
packaging. Make sure to support the
tower while cutting the ties so it doesn't
fall and become damaged.