Pro Boat PRB3800 - Manual (Page 5)

5
Installing the Receiver and Transmitter Batteries
Receiver Batteries
1. Lift the cockpit from the hull from the
rear. It is held in position using magnets
so there will be a little resistance when
lifting upward.
2. Lift the radio compartment hatch from the
radio compartment.
3. Remove the dry cell battery holder from
the radio box. Install four AA alkaline
batteries as shown with respect to polarity.
4. Place the battery holder back into the
radio box. Confirm the switch is in the "off"
position after installing the batteries.