Pro Boat PRB3800 - Manual (Page 6)

6
5. Place the radio box cover back onto the
radio box. Make sure it snaps tighly onto
the radio box to ensure a water-tight seal.
Transmitter Batteries
1. Remove the transmitter from the box.
2. Remove the battery cover on the bottom
of the transmitter.
3. Install the AA batteries into the
transmitter. Be aware of the proper
polarity when inserting the batteries.
4. Replace the battery cover to complete the
battery installation.
5. Turn on the radio to ensure the batteries
have been installed correctly. All 3 LEDs
will illuminate, indicating fully charged
batteries.
6. Turn the radio off to prevent accidentally
running the voltage out of the batteries.
Installing the Receiver and Transmitter Batteries