PS Engineering PXE7300 Installation Manual User Manual
Page 6
PS Engineering
PXE7300 Series IFE System
Installation and Operator’s Manual
200-973-0002
Page 1-3
April 2006
1.7
EQUIPMENT REQUIRED BUT NOT SUPPLIED
a)
Circuit Breaker, PULL TYPE: 1 ea. 2 amp
b)
Aircraft Audio System (See section 1.8 for approved system list)
c)
Interconnect Wiring
1.8
APPROVED AUDIO SYSTEMS
This is a list of audio system that the PXE7300 should interface with adequately.
Approved Audio Systems, PXE7300
Certified interface is approved only for audio systems that are FAA-TSO approved.
Make Model
Part
Number
PM1000II 11920,11922
PM3000 11931,
11932
PMA6000-Series 6000
(all)
PMA7000-Series 7000
(all)
PCD7100 11950,
11951
PMA4000 11942
PS Engineering
PAC24 050-240-(all)
SL10-Series 430-6060-XX
UPS Aviation Technologies
SL15-Series 430-6065-XX
Bendix/King KMA28
066-01176-0101
GARMIN International
GMA340
010-00152-XX
While the output of the PXE7300 is designed to work the majority of intercoms and audio panels at the
time of development, PS Engineering cannot guarantee satisfactory results for all devices.
1.9 LICENSE
REQUIREMENTS
North America- None
International Customers may need to check with appropriate governing bodies before using the system.