PS Engineering PMA8000B Installation Manual - Manual (Page 17)

PS Engineering
PMA8000B Audio Selector Panel and Intercom System
Installation and Operator’s Manual
200-890-0101 Page 2-10 Rev. 4, April 2012
Figure 2-4- PMA8000B Adjustments, top cover
 Speaker Volume- Turn adjustment clockwise to increase cabin speaker output.
 Marker Beacon Volume, turn adjustment counterclockwise to increase marker beacon audio
level.
 TEL volume, turn adjustment Clockwise to increase the incoming telephone audio.
 ANN VOL Function Mode Annunciation Volume – controls the level of the to access voice an-
nunciations contained in the unit. (Top cover must be removed).
 Unswitched Input 3 Volume, adjust from 50% to 200% of input value. (Bottom cover must be
removed).
Figure 2-5 – Unswitched 3 Audio Level (bottom cover removed)
Front
of unit
NOTE:
If top cover is removed
for ANY reason, you
MUST replace the cover
screws with the proper
length, otherwise damage
will result.
Shorter Screw