Section i - general information, 1introduction, 2scope – PS Engineering DRAWS User Manual

Page 3: 3equipment description, 4approval basis - none, Section i - general information -1, Introduction -1, Scope -1, Equipment, Description -1

Advertising
background image

PS Engineering

PRD60 Remote DRAWS Unit

Installation and Operator’s Manual

200-160-0200

Page 1-1

Rev 3, Sept. 2012

Section I - GENERAL INFORMATION

1.1 INTRODUCTION

The PRD60 is an accessory device designed to improve the safety of flight by providing an
aural annunciation of out of limit conditions. In a critical situation this directs the pilot’s
attention to the proper indicator. This system does not replace any existing annunciation,
but adds an additional layer of vigilance.

In addition, the unit contains a 4-channel summing amplifier to allow multiple unswitched
audio sources to be combined into one output.

Before installing and/or using this product, please read this manual completely. This will
ensure that you will take full advantage of all the advanced features in the PRD60.

1.2 SCOPE

This manual provides detailed installation and operation instructions for the PS Engineer-
ing PRD60-series of Audio Selector Panel/Intercom Systems. This includes the following
units:

Model

Description

Part Number

PRD60

Remote Digital Aural Warning System

050-160-0200

PRD60

Remote DRAWS with custom messages

050-160-xxxx

1.3 EQUIPMENT DESCRIPTION

The unit is a remote-mounted device with input for up to six (6) discrete, ground seeking
annunciations.. In addition, a 4-channel summing amplifier allows multiple unswitched in-
puts to be combined into a single output.

The messages are pre-programmed by the factory to meet the customer’s requirements.

The unit also provides audio summing for up to four unswitched inputs.

1.4 APPROVAL BASIS - None

None

NOTE: The message annunciations contained in the PRD60 are not FAA-approved, and
the installer must determine the relevant approval basis prior to installation. Contact PS
Engineering for information regarding FAA approval.

Operation is subject to the following conditions:

This device may not cause harmful interference.

Advertising