PS Engineering PAV80 Installation Manual - Manual (Page 18)

PS Engineering
PAV80
Installation and Operator’s Manual
200-800-0101 Page 3-2 Rev. 6 Sept. 2005
3.2.4 The ►► Button (4)
In disc mode, a short press of this button will advance to the next track. A longer press will put the disc
into fast forward mode. Press the play/pause button to resume normal play
In AM/FM mode, this button scans up the frequency band.
3.2.5 The Mode Knob (5)
In the Disc mode, the knob will advance (CW) or decrease (CCW) the track.
In AM or FM radio mode, this knob can be used to tune the radio directly.
This knob is also used to select the operational mode. Press the knob once to change the primary mode.
The left hand LCD display will blink to indicate that the mode can be changed. Turn the knob to change
the mode. Here are the mode selections:
DSK – DVD/MP3/CD mode
FM – FM tuner mode
AM – AM tuner mode
AUX – Auxiliary Audio/Video mode
AXA– Auxiliary Audio Only mode
OFF – Output is disabled
Press the knob again and the right hand side of the display (P) will blink to indicate that the secondary
mode can be changed. The knob must be pressed a third time to lock in the mode selection.
3.2.6 The ◄◄ Button (6)
In disc mode, a short press of this button will advance to the previous track. A longer press will put the disc
into rewind mode. Press the play/pause button to resume normal play
In AM/FM mode, this button scans down the frequency band.