PS Engineering PAV80 Installation Manual - Manual (Page 6)

PS Engineering
PAV80 Series IFE System
Installation and Operator’s Manual
200-800-0101 Page 1-3 Rev. 6 Sept. 2005
PVT801 Video Terminal Unit
FAA-TSO COMPLIANCE
APPLICABLE DOCUMENTS: SAE AS8034
RTCA/DO-160D
RTCA/DO-178B (Level E)
RTCA DO-254 (Level E)
ENVIRONMENTAL Qualifications: B4BABSXXXXXXZBBBAUHXXX
Temperature Range:
Operating:
Storage:
-0º C to 40ºC
-20º C to 85ºC
Altitude: Up to 25,000 feet in a non-pressurized area of the cockpit.
DIMENSIONS: 5.98” W x 4.28” H X 1.20” D
(152x 108 x 30.5mm)
Screen size 5.6” diagonal
WEIGHT: 1.33 lbs (500g)
Input Composite NTSC, PAL
POWER REQUIREMENTS (Including Internal Lighting):
Voltage:
Maximum Current:
Typical operating current:
Supplied by panel unit
REMOTE
DIMENSIONS:
Weight 2.375” W x 3.80” H X 0.25” D
(60 x 93 x 6.4 mm)
1.0 oz. (28.4 gm)
Power 3 VDC, 1 ea. CR2025 battery
PVA802 Video Distribution Amplifier
ENVIRONMENTAL Qualifications: B1CABSXXXXXXZBBBAUHXXX
Temperature Range:
Operating:
Storage:
-0º C to 40ºC
-20º C to 85ºC
Altitude: Up to 25,000 feet in a non-pressurized area of the cockpit.
DIMENSIONS: 1.25" H x 4.00" W x 5.50" D
(32 x 102 x 140 mm)
WEIGHT 0.6 lbs (0.25 kg)
Input 1 ea Composite NTSC, PAL
Control input
Output 4 ea. Composite NTSC, PAL
4 ea. 12 VDC conditioned power @ 1A
POWER REQUIREMENTS
Voltage:
Maximum Current: 10-30 VDC
4 A max (5A pull type breaker required)
1.6 EQUIPMENT SUPPLIED
PAV80 Single Display System 1 ea. of the following units: