PS Engineering PCD7100-I Pilot’s Guide - Manual (Page 2)

2 Rev. 2 PCD7100-I -Pilot Guide
GENERAL INFORMATION
SCOPE
This manual provides detailed operating instructions for the PS Engineer-
ing PCD7100-I Intercom Systems with integrated Compact Disc (CD)
player (p/n 11950, 11951) or CD/MP3 Player (p/n 11956, 11957). Please
read it carefully before using the equipment so that you can take full advan-
tage of its capabilities.
NOTE: Installation instructions are contained in Installation Manual, Part
Number 200-971-xxxx, available from your authorized PS Engineering
dealer, or at www.ps-engineering.com/pcd7100.shtml
PCD7100 controls
1.2 Power Switch (Fail Safe Operation)
Unit power is turned on and off by pushing the intercom volume knob. In
the
OFF or "EMG" position, the pilot is connected directly to the aircraft
radios. This allows communication capability regardless of unit condition.
Any time power is removed or the unit turned
OFF , the intercom will be
placed in the fail-safe mode.
1.3 Intercom Operation
1.3.1 Intercom Volume Control
The ICS volume control knob (left side) adjusts the loudness of the inter-
com for the pilot and copilot only. It has no effect on selected radio levels,
music input levels or passengers' volume level.
Adjust the radios and intercom volume for a comfortable listening level for
the pilot. Most general aviation headsets today have built-in volume con-
trols; therefore, passenger volume can be reduced at the headset.
INTERCOM
VOLUME MUSIC
VOLUME
PLAY SKIP FWD SKIP BACK STOP EJECT
INTERCOM MODE
PUSH
ON-
OFF
PUSH
MUTE
CONTROL