PS Engineering PCD7100-I Pilot’s Guide User Manual

Page 7

Advertising
background image

7

PCD7100-I Pilot Guide

Rev. 2

must be used for the warranty to be valid.
PS Engineering, Inc. warrants this product to be free from defect in mate-
rial and workmanship for a period of one (1) year from the date of installa-
tion as recorded in aircraft logbook and/or on FAA Form 337. During the
twelve (12) months, PS Engineering, Inc., at its option, will send a replace-
ment unit at our expense if the unit should be determined to be defective
after consultation with a factory technician.

All transportation charges for returning the defective units are the responsibility of
the purchaser. All domestic transportation charges for returning the exchange or
repaired unit to the purchaser will be borne by PS Engineering, Inc. The risk of loss
or damage to the product is borne by the party making the shipment, unless the
purchaser requests a specific method of shipment. In this case, the purchaser as-
sumes the risk of loss.

This warranty is not transferable. Any implied warranties expire at the expiration
date of this warranty. PS Engineering SHALL NOT BE LIABLE FOR INCIDEN-
TAL OR CONSEQUENTIAL DAMAGES. This warranty does not cover a defect
that has resulted from improper handling, storage or preservation, or unreasonable
use or maintenance as determined by us. This warranty is void if there is any at-
tempt to dissemble this product without factory authorization. This warranty gives
you specific legal rights, and you may also have other rights, which may vary from
state to state. Some states do not allow the exclusion of limitation of incidental or
consequential damages, so the above limitation or exclusions may not apply to you.

All items repaired or replaced under this warranty are warranted for the remainder
of the original warranty period. PS Engineering, Inc. reserves the rights to make
modifications or improvements to the product without obligation to perform like
modifications or improvements to previously manufactured products.

2.2 Factory

Service

The unit is covered by a one-year limited warranty. See warranty information. Con-
tact PS Engineering, Inc. at (865) 988-9800 or www.ps-engineering.com/
support.shtml before you return the unit. This will allow the service technician to
provide any other suggestions for identifying the problem and recommend possible
solutions.

After discussing the problem with the technician and you obtain a Return Authori-
zation Number, ship product to:

PS Engineering, Inc.
Attn: Service Department
9800 Martel Rd
Lenoir City, TN 37772
(865) 988-9800

FAX (865) 988-6619

Email: [email protected]


NOTE: PS Engineering will not be responsible for any units shipped in the
U. S. Mail. Any item received that does not have either an RMA or a de-
tailed description of the problem AND a contact name and phone number
will be refused.

Advertising