Crestron electronic GreenLight DIN-8SW8 - Manual (Page 11)

Crestron DIN-8SW8 DIN Rail High-Voltage Switch
Connectors, Controls & Indicators
# CONNECTORS*,
CONTROLS & INDICATORS
DESCRIPTION
1 1 – 8
(Connectors, LEDs and
Buttons)
(8) Sets of (2) captive screw
terminals;
Isolated Class 1 SPST relay
switch circuits 1-8;
Relay rating:
10 Amps incandescent
5 Amps fluorescent
16 Amps resistive
0.5 HP @ 120-240 Volts AC
(per
channel)
Maximum wire size: 2.5 mm 2
(12 AWG);
(8) Red LEDs and (8) miniature
pushbuttons for status indication
and local control of each channel
2 NET (2) 4-pin 3.5 mm detachable
terminal blocks, paralleled;
Cresnet slave port;
Connects to Cresnet control
network;
Maximum wire size: 1.5 mm
2
(16 AWG);
24:
Power (24 Volts DC)
Y: Data
Z: Data
G: Ground
3 NET ID
DISPLAY and CONTROL
(2) 7-Segment green LED digits
and (2) miniature pushbuttons for
setting Cresnet ID
(Continued on following page)
Operations & Installation Guide – DOC. 6666B DIN Rail High-Voltage Switch: DIN-8SW8 • 7