Crestron electronic GreenLight DIN-8SW8 - Manual (Page 25)

Crestron DIN-8SW8 DIN Rail High-Voltage Switch
Save
Override
Settings The state of each output can be saved as an override setting, which can
be automatically recalled when the Override mode is enabled.
NOTE: The control system program has a setting that can prevent
locally saving the override state. If this setting is enabled, the display
shows “Er” when trying to save override states. For more information,
refer to the SIMPL Windows help file.
To save the state of an output as an override setting, press and hold the
OVR button for three seconds. The OVR LED blinks to indicate the
new override setting has been stored.
Reset To reboot the DIN-8SW8, press the RESET button. The outputs will be
set to the states currently specified by the control system program. If the
control system does not provide any values, the outputs will be set to the
previously set values.
Operations & Installation Guide – DOC. 6666B DIN Rail High-Voltage Switch: DIN-8SW8 • 21