Ram Trucks 2012 3500 - Owner Manual - Manual (Page 234)

additional cargo room is needed. The extender position
utilizes a locating pin and rotating handle located on both
sides of the truck bed near the tailgate.
To install the bed extender into the extender position
perform the following:
1. Lower the tailgate.
2. Make sure the center handle is unlocked and rotate the
center handle vertically in order to release the extender
side gates.
3. Fit the end of the side gate ends onto the pin and
handle.
Extender Position
Extender Installation
232 UNDERSTANDING THE FEATURES OF YOUR VEHICLE