Transfer case position indicator light, Electronically shifted transfer case, Four-position switch) – if equipped – Ram Trucks 2012 3500 - Owner Manual User Manual

Page 415

Advertising
background image

method is with the vehicle rolling 2 to 3 mph (3 to
5 km/h). Avoid attempting to engage or disengage 4L
with the vehicle moving faster than 2 to 3 mph (3 to
5 km/h).

• Do not attempt to shift into or from 4L while the

transmission is in gear.

Transfer Case Position Indicator Light

The “Transfer Case Position Indicator Light” in the
instrument cluster is used to alert the driver that the front
axle is fully engaged and all four wheels are driving.

Electronically Shifted Transfer Case
(Four-Position Switch) – If Equipped

This is an electronic shift transfer case and is operated by
the 4WD Control Switch (Transfer Case Switch), which is
located on the instrument panel.

This electronically shifted transfer case provides four
mode positions:

• Two-wheel drive high range (2WD)
• Four-wheel drive lock range (4WD LOCK)
• Four-wheel drive low range (4WD LOW)

Transfer Case Switch (Four-Position)

5

STARTING AND OPERATING

413

Advertising
This manual is related to the following products: