Center lap belts – Ram Trucks 2012 3500 - Owner Manual User Manual

Page 51

Advertising
background image

As a guide, if you are shorter than average you will
prefer a lower position, and if you are taller than average
you will prefer a higher position. When you release the
anchorage, try to move it up or down to make sure that
it is locked in position.

Center Lap Belts

The center seating position for the Quad Cab

௡, Mega

Cab

௡ and Crew Cab front seat has a lap belt only. To

fasten the lap belt, slide the latch plate into the buckle
until you hear a

Љclick.Љ To lengthen the lap belt, tilt the

latch plate and pull. To remove slack, pull the loose end
of the webbing. Wear the lap belt snug against the hips.
Sit back and erect in the seat, then adjust the belt as
tightly as is comfortable.

WARNING!

A lap belt worn too loose or too high is dangerous.

A belt worn too loose can allow you to slip down

and under the belt in a collision.

A belt that is too loose or too high will apply crash

forces to the abdomen, not to the stronger hip
bones. In either case, the risk of internal injuries is
greater. Wear a lap belt low and snug.

Adjusting Upper Shoulder Belt

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

49

Advertising
This manual is related to the following products: