Tether installation for commercial cargo vehicles, Restraining infants and small children in, Commercial cargo vehicles – Ram Trucks 2013 С/V - Owner Manual User Manual

Page 118

Advertising
background image

Restraining Infants And Small Children In
Commercial Cargo Vehicles

There are different sizes and types of restraints for
children from newborn size to the child almost large
enough for an adult safety belt. Use the restraint that is
correct for your child. Refer to “Child Restraints” in the
“Occupant Restraints” section.

Tether Installation For Commercial Cargo Vehicles

To secure the child restraint upper tether strap to the
vehicle, follow these steps:

1. Locate the child restraint tether anchor on the lower

rear of the front passenger seat.

2. Route the tether strap under the head rest.

NOTE:

Ensure that the child restraint tether strap is

centered between the headrest supports underneath the
head rest.

3. Using the hook attached to the child restraint tether

strap, attach the child restraint tether strap to the
metal anchor on the lower rear of the front passenger
seat.

4. Following the child seat manufacturer’s instructions,

tighten the child restraint tether strap.

WARNING!

The vehicle tether anchor is designed to be used with
a child restraint only. It should not be used for any
other purpose. Before use, inspect the tether anchor
strap for nicks, abrasions, discoloration, and loose
threads. If these or any other condition that might
affect the performance of the strap is observed, DO
NOT USE that strap. Personal injury may result.
Contact your authorized dealer for a replacement
part.

116

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Advertising