Remote key unlock on first press – Ram Trucks 2013 С/V - Owner Manual User Manual

Page 25

Advertising
background image

Remote Key Unlock On First Press

This feature lets you program the system to unlock either
the driver’s side, or all doors, on the first press of the
UNLOCK button on the RKE transmitter:

NOTE:

• For vehicles equipped with an Electronic Vehicle In-

formation Center (EVIC), refer to “Electronic Vehicle
Information

Center

(EVIC)/Personal

Settings

(Customer-Programmable Features)” in “Understand-
ing Your Instrument Panel” for further information.

• For vehicles not equipped with the EVIC, the Remote

Unlock feature can be enabled or disabled by perform-
ing the following steps:

1. Perform this operation while standing outside the

vehicle.

2. Press and hold the LOCK button on a programmed

RKE transmitter for at least 4 seconds, but no longer
than 10 seconds. Then, press and hold the UNLOCK
button while still holding the LOCK button.

3. Release both buttons at the same time.

4. Test the feature while outside of the vehicle by press-

ing the LOCK/UNLOCK buttons on the RKE trans-
mitter with the ignition switch in the OFF position and
the Key Fob removed.

5. Repeat these steps if you want to return this feature to

its previous setting.

NOTE:

Pressing the LOCK button on the RKE transmit-

ter while you are inside the vehicle will activate the
Vehicle Security Alarm. Opening a door with the Vehicle
Security Alarm activated will cause the alarm to sound.
Press the UNLOCK button to deactivate the Vehicle
Security Alarm.

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

23

Advertising