Uconnect® phone — if equipped – Ram Trucks 2013 С/V - Owner Manual User Manual

Page 147

Advertising
background image

NOTE:
• Whenever an audible alert is requested by the BSM

system, the radio is also muted.

• If the hazard flashers are on, the system will request

the appropriate visual alert only.

When the system is in RCP, the system shall respond with
both visual and audible alerts when a detected object is
present. Whenever an audible alert is requested, the radio
is also muted. Turn/hazard signal status is ignored; the
RCP state always requests the chime.

Blind Spot Alert Off

When the BSM system is turned off there will be no
visual or audible alerts from either the BSM or RCP
systems.

NOTE:

The BSM system will store the current operating

mode when the vehicle is shut off. Each time the vehicle
is started the previously stored mode will be recalled and
used

Uconnect® Phone — IF EQUIPPED

Uconnect® Phone is a voice-activated, hands-free, in-
vehicle communications system. Uconnect® Phone al-
lows you to dial a phone number with your mobile
phone using simple voice commands (e.g., “Call”

ѧ

“Mike”

ѧ “Work” or “Dial” ѧ “248-555-1212”). Your

mobile phone’s audio is transmitted through your vehi-
cle’s audio system; the system will automatically mute
your radio when using the Uconnect® Phone.

NOTE:

The Uconnect® Phone requires a mobile phone

equipped with the Bluetooth® “Hands-Free Profile”,
Version 0.96 or higher. See the Uconnect® website for
supported phones.

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

145

Advertising