Preparations for jacking, Jacking instructions, What to do in emergencies – Ram Trucks 2013 С/V - User Guide User Manual
Page 102
Advertising
Preparations For Jacking
1. Park the vehicle on a firm, level surface. Avoid ice or slippery areas.
2. Turn on the Hazard Warning flasher.
3. Set the parking brake.
4. Place the shift lever into PARK.
5. Turn OFF the ignition.
NOTE:
Passengers should not remain in the ve-
hicle when the vehicle is being jacked.
• Block both the front and rear of the
wheel diagonally opposite the jacking
position. For example, if changing the
right front tire, block the left rear
wheel.
Jacking Instructions
1. Loosen (but do not remove) the wheel
lug nuts by turning them to the left
one turn while the wheel is still on the
ground.
WHAT TO DO IN EMERGENCIES
100
Advertising