Diesel engine break-in recommendations, Diesel engine break-in, Recommendations – Ram Trucks 2014 Chassis Cab Commercial - Owner Manual User Manual

Page 110

Advertising
background image

CAUTION!

Never use Non-Detergent Oil or Straight Mineral Oil
in the engine or damage may result.

NOTE:

A new engine may consume some oil during its

first few thousand miles (kilometers) of operation. This
should be considered a normal part of the break-in and
not interpreted as an indication of difficulty.

DIESEL ENGINE BREAK-IN RECOMMENDATIONS

The Cummins® turbocharged diesel engine does not
require a break-in period due to its construction. Normal
operation is allowed, providing the following recommen-
dations are followed:
• Warm up the engine before placing it under load.
• Do not operate the engine at idle for prolonged

periods.

• Use the appropriate transmission gear to prevent

engine lugging.

• Observe vehicle oil pressure and temperature indicators.
• Check the coolant and oil levels frequently.
• Vary throttle position at highway speeds when carry-

ing or towing significant weight.

NOTE:

Light duty operation such as light trailer towing

or no load operation will extend the time before the
engine is at full efficiency. Reduced fuel economy and
power may be seen at this time.

For additional vehicle break-in requirements, refer to
“Trailer Towing” in “Starting and Operating” of the Owners
Manual.

Because of the construction of the Cummins® turbocharged
diesel engine, engine run-in is enhanced by loaded operat-
ing conditions which allow the engine parts to achieve final
finish and fit during the first 6,000 miles (10 000 km).

108

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Advertising