Lane change assist, Flash-to-pass – Ram Trucks 2014 Chassis Cab Commercial - Owner Manual User Manual

Page 157

Advertising
background image

NOTE:

If either light remains on and does not flash, or

there is a very fast flash rate, check for a defective outside
light bulb. If an indicator fails to light when the lever is
moved, it would suggest that the indicator bulb is
defective.

Lane Change Assist

Tap the lever up or down once, without moving beyond
the detent, and the turn signal (right or left) will flash
three times then automatically turn off.

Flash-To-Pass

You can signal another vehicle with your headlights by
partially pulling the multifunction lever toward the steer-
ing wheel. This will cause the high beam headlights to
turn on until the lever is released.

Turn Signal Lever

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

155

Advertising