RED DSMC MEDIA - Manual (Page 37)

RED DSMC MEDIA OPERATION GUIDE
COPYRIGHT © 2014 RED.COM, INC 955-0047, REV-F | 37
4. Select an option from the Select Media drop-down menu.
5. Select Format Media.
6. Select the following options to add camera identity information and 3D position properties:
‒ Reel No: Select a value in the range 1–999.
‒ Cam ID: Select a letter in the range A-Z to identify the camera.
‒ Cam Pos: Identify the camera position as Right, Left, or Center. Default is Center.
‒ Edge Timecode Start: Manually enter an Edge Timecode Start value (seldom used).
7. Select Format. (The Format button also displays the number of clips that will be deleted during formatting,
if any clips are on the SSD).
8. A dialog box displays and warns you that all clips will be deleted during formatting. Select Format to con-
tinue.
Formatting takes about 10 seconds. Once formatting is complete, the Viewfinder output(s) display the fol-
lowing message: “The media was successfully re-formatted and is ready for immediate use”.