Canon CR-50 - Manual (Page 21)

21
The only way to connect the scanner to your computer is with a USB cable.
IMPORTANT
• Be sure to use the USB cable bundled with the scanner or a Hi-Speed
USB 2.0 compatible cable with the length less than 5 m.
• When the application is running, do not turn the scanner OFF or unplug the
interface cable.
• Do not connect multiple CR-50/80 scanners to one computer.
CAUTION
• Do not turn OFF the scanner or remove the interface cable when an
application is running.
• Turn OFF the computer and the scanner before changing the cable.
USB Connections
Connect the scanner and the computer with the cable provided or a
Hi-Speed USB 2.0 cable.
NOTE
Connect the type B plug (square) to the scanner and connect the type A plug
(flat) to the USB port on the computer.
Connecting the Scanner to a Computer
Type A Plug Type B Plug
USB
Connector