Canon CR-50 - Manual (Page 23)

23
IMPORTANT
• When you turn ON the power, the power LED lights and remains lit.
• If the scanner does not work, there is a problem with the scanner. Turn OFF
the power, and contact your local authorized Canon dealer or service
representative to have the scanner serviced.
WARNING
If you hear strange sounds, detect smoke or abnormal heat, sense a
vibration, or smell odd odors around the scanner, turn OFF the power
immediately and disconnect the power cord from the power outlet.
Contact your local authorized Canon dealer or service representative to
have the scanner serviced.
B
Windows recognizes the CR-50/80 as new hardware, and
installation starts automatically.
NOTE
The CR-50/80 will be registered as “CANON CR-50 USB” or “CANON CR-80
USB” in the Imaging Device directory.
Turning OFF the Power
A
Turn OFF your computer.
B
To turn OFF the scanner, slide the Power Switch to the left.
CAUTION
• Wait at least 10 seconds before turning the scanner back ON.
• For your safety, disconnect the power plug from the power outlet if
you are not using the scanner for a long period of time.
(Windows 7)
(OFF)