Reznor S5BP Users Manual - Manual (Page 13)

13
ELECTRICAL INFORMATION
Table 4. Electrical Specifi cations & Physical Data - 11.2 E.E.R. - 3 Phase / 60 Hz
Model Number
S5BP-
090C 090D 120C 120D
208-230V 460V 208-230V 460V
920888 920889 920890 920891
PERFORMANCE DATA
Gross Cooling Capacity (95 o F) Btuh 92,400 92,400 121,700 121,700
1 Net Cooling Capacity - Btuh 90,000 90,000 117,000 117,000
1 A.R.I. Rated Airfl ow - C.F.M. 3,000 3,000 4,000 4,000
2 Cooling - Effi ciency E.E.R. (Btu/Watt) 11.70 11.70 11.20 11.20
3 Cooling - Effi ciency I.E.E.R. 11.80 11.80 11.50 11.50
ELECTRICAL RATINGS
Volts / Phase / Hz. 208-230 / 3 / 60 460 / 3 / 60 208-230 / 3 / 60 460 / 3 / 60
Operating Voltage 187-253 414-506 187-253 414-506
Unit Rated Ampacity 28.3 13.9 33.4 18.4
Minimum Circuit Ampacity (MCA) 34.6 17.0 40.9 22.6
4 Max. Overcurrent Protection (MOP) 50 25 70 35
Compressor Data: 1 ea. 1 ea. 1 ea. 1 ea.
Compressor (Scroll) ZP83KCE-TF5 ZP83KCE-TFD ZP103KCE-TF5 ZP103KCE-TFD
Volts / Phase /Hz. 208-230 / 3 / 60 460 / 3 / 60 208-230 / 3 / 60 460 / 3 / 60
Rated Load Amps (RLA) 25.0 12.2 30.1 16.7
Lock Rotor Amps (LRA) 164 100 225 114
Stages / Percent 1 / 100 1 / 100 1 / 100 1 / 100
Crankcase Heater - Qty. / Type 1 / Band 1 / Band 1 / Band 1 / Band
Outdoor Fan Assembly: 1 ea. 1 ea. 1 ea. 1 ea.
Volts / Phase /Hz. 208-230 / 1 / 60 460 / 1 / 60 208-230 / 1 / 60 460 / 1 / 60
Motor - HP / RPM 3/4 - 875 3/4 - 875 3/4 - 875 3/4 - 875
Motor Amps 3.3 1.7 3.3 1.7
Fan Blade - Diameter / Pitch / # Blades 30” / 22 / 3 30” / 22 / 3 30” / 26 / 3 30” / 26 / 3
RPM / CFM (Max. - Total) 850 - 7,200 850 - 7,200 850 - 8,000 850 - 8,000
PHYSICAL DATA & REFRIGERANT SPECS
Outdoor Coil Assembly: 1 ea. 1 ea. 1 ea. 1 ea.
Area (Ft. 2 ) 31.94 31.94 38.33 38.33
Rows - FPI 2 - 16 2 - 16 2 - 18 2 - 18
Tube Diameter 3/8” OD 3/8” OD 3/8” OD 3/8” OD
Refrigerant Suction Line - Length / OD
0 - 75 Ft. / 1-1/8” 0 - 75 Ft. / 1-1/8” 0 - 100 Ft. / 1-3/8” (6) 0 - 100 Ft. / 1-3/8” (6)
76 - 100 Ft. / 1-3/8” (6) 76 - 100 Ft. / 1-3/8” (6)
Refrigerant Liquid Line - Length / OD All Lengths - 5/8” OD All Lengths - 5/8” OD All Lengths - 5/8” OD All Lengths - 5/8” OD
Refrigerant Charge. R410A R410A R410A R410A
Factory Holding Charge - oz 90 90 90 90
5 Total System with 25’ Line Set 416 416 520 520
High Pressure Switch (PSIG)
Cut Out: 650 +/- 15
Cut In: 460 +/- 15
Loss of Charge Pressure Switch (PSIG)
Cut Out: 5 +/- 5
Cut In: 20 +/- 5
Net Unit Weight - Lbs. (No Packaging) 386 386 423 423
Approximate Shipping Weight - Lbs. 420 420 457 457
Note: Net capacity includes indoor blower motor heat deduction. Gross capacity does not include indoor blower motor heat deduction.
1 Cetifi ed in accordance with A.R.I. Standard 340/360 at 95° F Outdoor DB and 80° F db/67° F wb evaporator entering air at minimum
external duct static pressures allowed by the standard.
2 E.E.R. - Energy Effi ciency Ratio. E.E.R. is determined @ 95° F Outdoor DB & 80° F DB / 67° F WB Air Indoor
3 I.E.E.R. - Integrated Energy Effi ciency Ratio. Cetifi ed in accordance with A.R.I. Standard 340/360.
4 Delay Fuse or HACR Type Curcuit Breakers can be used.
5 Add / Subtract 9.0 oz. of refrigerant per 5 feet change in length from original 25 Ft. lineset total system charge.
6 Requires a 1-3/8” to 1-1/8” reducer line to unit.