SeaLand Diptube Kit User Manual

Sealand, Diptube kit installation instructions

Advertising
background image

1. Drill a 3-inch (76 mm) diameter hole on a flat spot on top of

the holding tank with a 3-inch hole saw.

2.

Determine the required length of the PVC pipe, using the
formula below:

3.

Cut pipe squarely and remove burrs.

4.

Clean all surfaces with PVC cleaner. Following instructions

SeaLand

®

Diptube Kit Installation Instructions

600343903

Dometic Corporation
13128 State Rt 226
PO Box 38
Big Prairie, OH 44611

© Dometic Corporation

on PVC cement, assemble pick-up adapter to one end of pipe.

5.

Slide sealing grommet onto PVC pipe, with wide end toward top of pipe (see diagram).

6.

Assemble top fitting to PVC pipe with PVC cement.

7.

Lubricate inside surface of sealing grommet and outer diameter of narrow end of top fitting with liquid
dishwashing soap.

8.

Insert the diptube assembly into the 3-inch hole and press the sealing grommet into the hole.

9.

Insert the diptube assembly into the sealing grommet.

Sealing grommet

Top fitting

1.5 in (38 mm)
PVC pipe

Pick-up adapter

A – 2.875 in. (73 mm) = B

A = Height from bottom to top
surface inside tank
B = Required length of PVC pipe

Advertising