Shellab SCO26H-2 - Manual (Page 3)

INTRODUCTION
Thank you for choosing a humidity testing incubator. These units are not intended for use at hazardous or household
locations.
Before you use the unit, read this entire manual carefully to understand how to install, operate, and maintain the unit
in a safe manner. Your satisfaction with the unit will be maximized as you read about its safety and operational
features.
Keep this manual for use by all operators of the unit. Ensure that all operators of the unit are given appropriate
training before you put the unit in service.
Note: Use the unit only in the way described in this manual. Failure to follow the guidelines and instructions in this
manual may be dangerous and illegal.
General Safety Considerations
Your incubator and its recommended accessories have been designed and tested to meet strict safety requirements.
For continued safe operation of your incubator, always follow basic safety precautions including:
Read this entire manual before using the incubator.
Be sure you follow any city, county, or other ordinances in your area regarding the use of this unit.
Use only approved accessories. Do not modify system components. Any alterations or modifications to your incubator
may be dangerous and will void your warranty.
Always plug the unit’s power cord into a grounded electrical outlet that conforms to national and local electrical codes.
If the unit is not grounded, parts such as knobs and controls may conduct electricity and cause serious injury.
Do not connect the unit to a power source of any other voltage or frequency beyond the range stated on the data
plate at the rear of the unit.
Do not modify the power cord provided with the unit. If the plug does not fit an outlet, have a proper outlet installed by
a qualified electrician.
Avoid damaging the power cord. Do not bend it excessively, step on it, place heavy objects on it. A damaged cord
can easily become a shock or fire hazard. Never use a power cord after it has become damaged.
Section
1