Receiving and inspection – Shellab SCO26H-2 User Manual
Page 4
RECEIVING AND INSPECTION
Your satisfaction and safety require a complete understanding of this unit,
including its proper function and operational characteristics. Read the instructions
thoroughly and be sure that all operators are given adequate training before
attempting to put the unit into service. NOTE: This equipment must be used only for
its intended application; any alterations or modifications will void your warranty.
1.1
Inspection: The carrier, when accepting shipment, also accepts the responsibility
for safe delivery and is liable for loss or damage claims. On delivery, inspect for
visible exterior damage, note and describe on the freight bill any damage found,
and enter your claim on the form supplied by the carrier.
1.2
Inspect for concealed loss or damage on the unit itself both interior and exterior. If
any, the carrier will arrange for official inspection to substantiate your claim.
1.3
Return Shipment: Save the shipping crate until you're sure all is well. If for any
reason you must return the unit, first contact your dealer for authorization and
supply nameplate data, including the serial number. For information on where to
contact Customer Service please see the manual cover.
1.4
Accessories: Make sure all of the equipment indicated on the packing slip is
included with the unit. Carefully check all packaging before discarding. All
models are equipped with 6 shelves, 24 shelf clips and 4 leveling feet.
Section
2